Iron & Steel Industry | Sectors

back

Iron & Steel Industry

General characteristics

  • Strong and reliable
  • Cast iron (from size 80) and machine-welded steel frameworks.
  • Availability to set up with radial fin frameworks for torque motors to activate roller tracks
  • Special insulation elements and designs for corrosive environments (joints, gaskets, seals…)
  • Possibility to seal the stator pack in resin for greater resistance to corrosive atmospheres.
  • From 0.1 kW to 500 kW
  • Sized to measure for the specific service they are designed for: S2-30', S3, S4-300 start-ups/hour, S4, S5…. and the work cycle
  • 1, 2 or 3-speed motors in the case of cranes.
  • Brake torques from 1.5 to 2.5 times the nominal motor torque to ensure the load is properly held in place
  • High protection levels, from IP55, IP56, available up to IP66
  • Special equipment for different voltages and working frequencies.
  • Adapted for work with a frequency variator
  • Insulation level F or H depending on the client’s requirements.
  • High start-up torque and maximum torque
  • Resistant to high intensity start-up values, as is the case with motors for intermittent services with a high number of start-ups per hour.
  • Universal or personalised shaft outputs (diameter, length, key).
OBEKI manufactures motors for:
  • Rolling mills:
    • Roller tracks
    • Straighteners
  • Cranes for iron & steel applications
  • Carriers
  • Furnaces
  • Scrap metal grapplers
  • With difficult working conditions (temperature, steam, challenging work cycles: stop-start, number of start-ups/hour…)